Great Plains 1525P Operator Manual User Manual
Page 80
Advertising
1525P, 1510HDP
118-949M
8/14/2006
78
Refer to Figure 97
4.
Enter the actual amount metered using
the Up/Down arrow keys. Press Func-
tion key to advance to next window.
Refer to Figure 98
5.
A New calibration number is suggested,
along with the Old calibration number.
Refer to Figure 99
6.
Press Function key to advance to win-
dow shown.
7.
If you wish to keep the Old number, per-
haps to re-run the calibration procedure,
press the Down arrow key. If you want to
accept the New calibration number,
press the Up arrow key.
Figure 97
22729
Figure 98
22730
Figure 99
22731
Advertising
This manual is related to the following products: