Great Plains DICKEY-john Auto Section Control - Manual (Page 23)

OPERATOR’S MANUAL
Auto Section Control System
11001-1561B-201207
INTELLIAG PDC SETUP / 21
MODULE OUTPUT ASSIGNMENT EXAMPLE
1. Three solenoid outputs to be controlled by Tru Count output module.
2. Number of rows assigned to each output.
3. Row shutoff switches assigned to corresponding outputs.
4. Corresponding row shutoff switches will turn sections on and off.
Figure 24
Clutch Setup for Row Shutoff Module
IMPLEMENT SECTION CHECK
IMPORTANT: After clutch row assignment, it is recommended to
perform a diagnostics check to verify the order of clutch
sections shut on and off correctly. Refer to the
Diagnostics section for section check instruction.
MASTER
ROW SECTION
1 2 3 4 5 6
Rows
1-9 Rows
10-15 Rows
16-24 Master
On/Off Not
assigned Not
assigned Not
assigned
1
2
3
4
TCOM