Great Plains DICKEY-john Auto Section Control - Manual (Page 32)

OPERATOR’S MANUAL
Auto Section Control System
11001-1561B-201207
30 / FIELD PREPARATION
Figure 29
Side-to-Side Overlap Adjustment with Planter (Single Section)
Example:
One-to-One Row/Clutch Assignment
A one-to-one row/clutch assignment set at 100% turns individual rows on
and off with an overlap and no gap. As the side-to-side overlap percentage
decreases, the overlap decreases and the gap increases. As the
side-to-side overlap percentage adjustment increases, the amount of
overlap increases and the gap decreases. A 50% adjustment results in a
50% overlap and 50% gap when the section center crosses the angle.
Figure 30
One-to-One Clutch Assignment with 100% Side-to-Side Overlap
}
Overlap
}
Overlap
}
100% Overlap Adjustment 50% Overlap Adjustment
Skip
50% Overlap Adjustment 100% Overlap Adjustment
Overlap
Overlap
Skip