Great Plains DICKEY-john Auto Section Control - Manual (Page 43)

OPERATOR’S MANUAL
Auto Section Control System
11001-1561B-201207
SYSTEM OPERATION / 41
4. Left Section Indicator buttons define all sections in the left group
when moved. The color of the left and right indicator identifies the
action (on or off) to occur when section indicators are moved.
5. Right Section Indicator buttons define all sections in the right group
when moved. The color of the left and right indicator identifies the
action (on or off) to occur when section indicators are moved.
6. All On or All Off buttons turns all sections on or off when pressed and
moves left and right section indicators back to the outside.
MANUAL MODE
Manual mode allows the operator to manually control planter sections in the
event of a lost GPS signal or in special conditions, such as marking
headlands in Override. When the system is in manual mode, sections must
be turned on and off either on the Auto Section Control screen or the Row
Control Switch module or Clutch Fold module.
NOTE: Pressing a section indicator
button represents what action
will occur when pressed, not
the current action.
Figure 41
Section Indicators
MANUAL ON/OFF CONTROL OF SECTIONS
In manual mode, section indicators allow manual control of turning
implement sections on and off. Manual Active button must be pressed to
enable Manual mode.
1. Left On/Off button turns all sections to the left of the section indicator
on (green) or off (white) when pressed as depicted on the implement
bar.
2. Right On/Off button turns all sections to the right of the section
indicator on (green) or off (white) when pressed as depicted on the
implement bar.
3. On/off button turns all sections between the section indicators on or off
when pressed.
4. Left Section Indicator buttons define all sections in the left group to
be controlled by the left Auto/On/off button when moved. The color of
1 2 3
4 5
On/Off button
automatically
turns sections
on and off
when section
indicators are
pressed
6
Toggles between
Auto/Manual
mode
Manual
Mode
Enabled
Implement
Bar
Sections