Great Plains DICKEY-john Auto Section Control - Manual (Page 30)

OPERATOR’S MANUAL
Auto Section Control System
11001-1561B-201207
28 / AUTO SECTION CONTROL SETUP
• When diagnosing system accuracy issues, it is recommended to re-run
the GPS calibration.
• In the event a new software version is loaded in the Auto Section
Control or GPS receiver, the GPS calibration should be executed as
the software update could cause the GPS lag value to change.
Figure 28
GPS Calibration Screens
+
Tractor
position
Reference
line
Auto Section Control Terminal
IntelliAg
Virtual
Terminal