Great Plains DICKEY-john Auto Section Control - Manual (Page 6)

OPERATOR’S MANUAL
Auto Section Control System
11001-1561B-201207
4 / INTRODUCTION
AUTO SECTION CONTROL INSTALLATION
The Auto Section Control cab kit includes:
• Swath Control display
• Display mount
• Display to CAN harness
Refer to ( Figure 3 ) harness connections.
CAB TERMINAL MOUNT
The Auto Section Control terminal is secured in the tractor cab by a ram
mount bracket.
• Ball mount at top and bottom of bracket allows for orientation in many
different positions.
• Wing bolt in middle of bracket tightens and secures the terminal to the
desired position.
Figure 2
Auto Section Control Terminal Mount
Position terminal so that operator view is not obstructed and does
not interfere with tractor operation.
Secure VT to bracket using
4 Metric screws (included)
Secure bracket to
tractor cab using 4
SAE screws (included)
1 2
3 4