Humboldt 5000 BLU Light Weight Deflectometer - Manual (Page 55)

55
7.7 Service
7.7.1 Input Test
Turn on the device by pressing the ‘START’ button. Enter the ‘MAIN
MENU’ by pressing the ‘SELECT’ button. Use the ‘SELECT’ button to
move the arrow and select ‘SERVICE’ from the menu. Press the ‘START’
button (SET) to enter the ‘SERVICE’ menu.
Use the ‘SELECT’ button to move the arrow and select ‘INPUT TEST’ from
the menu.
Press the ‘START’ button (SET) to enter the ‘INPUT TEST’ menu.
The ‘INPUT TEST’ serves to check the functionality of the device and
shows important function parameters of the device components.
Press the ‘RESET/OFF’ button (EXIT) to return to the ‘SERVICE’ menu.
Press the ‘RESET/OFF’ button (EXIT) again to return to the ‘MAIN MENU’.
Press the ‘RESET/OFF’ button (EXIT) again to return to the ‘STATUS
REQUEST’. Pressing the ‘START’ button will start the test procedure.
7.7.2 Version
Turn on the device by pressing the ‘START’ button. Enter the ‘MAIN
MENU’ by pressing the ‘SELECT’ button. Use the ‘SELECT’ button to
move the arrow and select ‘SERVICE’ from the menu. Press the ‘START’
button (SET) to enter the ‘SERVICE’ menu.
Use the ‘SELECT’ button to move the arrow and select ‘VERSION’ from
the menu.
Press the ‘START’ button (SET) to enter the ‘VERSION’ menu, where you
will find:
- 12 digit device number
- device type
- last calibration date
- calibration factor
- firmware version
- number of tests performed since last firmware update
Press the ‘RESET/OFF’ button (EXIT) to return to the ‘SERVICE’ menu.
Press the ‘RESET/OFF’ button (EXIT) again to return to the ‘MAIN MENU’.
Press the ‘RESET/OFF’ button (EXIT) again to return to the ‘STATUS
REQUEST’. Pressing the ‘START’ button will start the test procedure.
MAIN MENU
SERVICE MENU
USB STICK
LANGUAGE
GPS / TIME
INTERNAL MEMORY
SERVICE
EXIT SET
→
→
INPUT TEST
VERSION
10/15/20 Kg MODE
DISPLAY CONTRAST
PC SERVICE
CALIBRATION MODE
EXIT SET
→
→
SERVICE MENU
INPUT TEST
VERSION
10/15/20 Kg MODE
DISPLAY CONTRAST
PC SERVICE
CALIBRATION MODE
EXIT SET
→
INPUT TEST MENU
A/D Oxe597 = -6730
ULoad 00.70 V
USensor 11.99 V
UPrinter 5.95 V
A/D: W/R OK
GPRMC ,171325.714,A,52
EXIT
VERSION MENU
DEVICE #082008004012
TYPE: 300mm 10kg
CAL. DATE: 01.06.13
FACTOR 1.010
FIRMWARE: 0.27
MEASUREMENTS: 1142
EXIT
→