Humboldt 5000 BLU Light Weight Deflectometer - Manual (Page 71)

71
8.3.8 Test Data Loading
To load previously stored test data from a media (PC, USB stick, SD card, etc.), click on the button ‘LOAD
TEST DATA’. The file catalogue, in which the last test data has been saved, will open. Select the desired test
data and confirm your selection with ‘OK’. The stored test data will be loaded and displayed as a diagram,
with data record number, date, time, and Evd value. The data is now ready for further processing.
The content of only one folder, one external media device, or the testing computer can be displayed in
the test data list at any one time. If you would like to include several test series in one test data list, save
all required data records in the same folder. Then, load it into the ‘TERRATEST 2.0’ software by clicking
on the button ‘LOAD TEST DATA’.
To load previously stored data, click on ‘LOAD TEST DATA’ and select the storage location of the saved
data. Confirm with ‘OK’ and the data will be loaded.