Humboldt 5000 BLU Light Weight Deflectometer - Manual (Page 65)

65
8.3.4 ‘TERRATEST 5000 BLU’ – Reading SD Card
To load data from the SD card, insert the card into the SD card slot of your PC.
Make sure that software and driver of the SD card reader are correctly installed on your PC, and that the
media is mounted correctly.
Click on the button ‘READ MEDIA’. A file window will open. Select the SD drive and then the test data to
be loaded. Click ‘OPEN’ to load the test data from the SD card. A progress bar indicates the progress of
the reading process. Once loading is complete, the test data will appear in the left window as a test data
list, including data record number, date, time, and Evd value. The test data is now ready for processing.
If there is no data stored on the SD card, you will receive the message ‘NO DATA AVAILABLE’, once
reading is complete.
The content of only one folder, one external media device, or the testing computer can be displayed in
the test data list at a any one time. If you would like to include several test series in one test data list, save
all required data records in the same folder. Then, load it into the ‘TERRATEST 2.0’ software by clicking
on the button ‘LOAD TEST DATA’.
In the folder pane you can select the tests to be loaded.