Baumer NE215 - Manual (Page 12)

12
NE215
If other values are changed, the value at witch the operating level
was left can be re-displayed with the key after the
programming mode has been left.
Other changes Press the key.
● Read preset value P2
To change Press the key.
● LED P2 flashes.
Press the key.
● Preset 2 is being deleted.
Input the preset value P2 via the numerical keypad.
Press the key.
● The change is completed.
If a key is not operated within 15 seconds, the preset value will
automatically be re-displayed in the operating mode.
Other changes Press the key.
● The following values can also be changed.
If other values are changed, the value at witch the operating level
was left can be re-displayed with the
key after the
programming mode has been left.
Totalizing counter
The totalizing counter can be disabled in the programming mode.
To read Press the key.
Read the totalizing counter.
Reset Press the key.
Secondary counter status
The secondary counter can be disabled in the programming mode.
To read Press the key.
Read off the current limit value secondary counter status
Reset Press the key.
Operating mode