Baumer NE215 - Manual (Page 35)

35
NE215
- the number of stop bit
The contacts 21(-T,R) and 22(+T,R) are assigned to the open RS485-type
interface.
9. Supplement to the scaling factor manual
(May 1999)
This supplementary manual is describing the modification of the
counter’s operation manual regarding application of the scaling factor
and the alibi printer SP 298 of the company Star. It is according to the
third addendum of licence No. 1.62-3251.11 file number 5.23-99037480
dated 24.06.1999.
Address for printer: DATAMEGA Mikrodatentechnik GmbH
Landsberger Str. 318-320
80687 München
Tel.: 089/56017-300
9.1 Modifications in Chapter 2: „Get to know the counter“
The counter consist of
- preset counter with 2 presets (PTB-approved) and scaling factor
- batch counter with preset and multiplier
- totalizer, (PTB-approved) with scaling factor
- hour counter
The device is approved by the German Physical-Technical Authorities
(PTB) for calibration. The PTB-approved register system provides a
printer model Star SP298 with serial interface RS232.
Printer DIP switch settings (for counters with closed interface):
The settings correspond to the counter default parameters in pro-
gramming lines 43 and 44. Upon any modifications the DIP switch
settings have to be adapted correspondingly.
Printer DIP switch settings (for counters with closed and open
interface):
These settings are always valed since they cannot be altered in any
way at the counter.
Schalter 1 2 3 4 5 6 7
Off On Off Off Off Off On
Baudrate: 7 Datenbits gerade Parität Xon/Xoff 2K Puffer
4800 Bit/s
Schalter 1 2 3 4 5 6 7
Off On Off On Off Off On
Baudrate: 7 Datenbits keine Parität Xon/Xoff 2K Puffer
4800 Bit/s
Supplement