Baumer NE215 - Manual (Page 15)

15
NE215 Programming mode
Key for printing Druck
Function in the operating mode The simultaneous operation of the Key for printing an the 2 key
starts the test routine; the power supply must be switched on at the
same time.
Function in operating and Printout release of the main counter.
programming modes
The method of accessing the programming mode is described
below, together with the four programming segments in the order in
which they are used.
To access programming
Press the key.
● The system transfers from the operating to the programming
mode.
Press the key.
● is displayed. The code applies to programming
segments 1 - 4.
Input code.
Press the key.
No code is entered before delivery.
In correct code If an incorrect code has been input:
● appears in the display when the key is pressed.
● The counter reverts to the operating mode.
Press the key.
Press the key.
Input the correct code.
Correcter code unkown If the correct code is not known:
Return the counter to the factory .
When the correct code has been input, press the key.
● Now the programming lines are being called off one after the
other.