Baumer NE215 - Manual (Page 16)

16
NE215
Programming segment 1
Information on the displays and changing individual values is also
given in Part 4.
Press the key again.
● The operating parameters are now called up. The respective
LED flashes.
To changing operating parameters Input the new values via the numerical keypad.
Line 1 XP - Current counter status
Line 2 P1 - Preset value 1
Line 3 P2 - Preset value 2
Line 4
Σ
- Totalizer
Line 5 XB - Secondary counter status
Line 6 B1 - Secondary counter preset value
Line 7 - Time meter
● At the conclusion of the first programming segment, a broken
line appears in the display.
Programming mode
The LED display below
the meter symbol “m” is
always active with
length measurement
parameters.