Dell PowerVault 56F (16P Fibre Channel Switch) - Manual (Page 103)

support.dell.com Troubleshooting 5-5

%

 
1 

 


 
 
)
 
  
 
  


 * 



 
Press <Enter> while the Test Menu is displayed on the switch’s front panel; this
action allows you to select the operations in the following section.
NOTE: See Appendix A, “Error Messages” for the actual error message descriptions.

++
Pressing <Enter> at the Switch Offline window displays a prompt asking if you want
the switch offline. Click either Yes or No.
Tests that would jeopardize data transmission require taking the switch offline. If the
switch is not offline, a prompt appears before the test is allowed to proceed.


Pressing <Enter> at the Ram Test window displays a prompt asking if you want the
switch online. Click either Yes or No.
After the switch is online, proceed with the test.
% (&

Pressing <Enter> while the RAM Test window displays either an error message or a
message that the
$

.
An error message would look similar to the following example:
310* ( %/P5310* ( #Q5310* ( =22
 $
 %%' 
 $ 
   $ 
portRegTest ramTest
centralMemoryTest crossPortTest
cmiTest
sramRetentionTest
cmemRetentionTest
camTest
portLoopbackTest
spinSilk