Dell PowerVault 56F (16P Fibre Channel Switch) - Manual (Page 112)

6-4 Installation and Troubleshooting Guide
$  
-
 !
Replacing the fan assembly involves removing the the existing fan assembly, and
installing a new assembly.

0;,

 


*

<



  


You do not need to power off the switch during this replacement. The switch can
safely run at the following temperatures while the fans are replaced:

25 minutes at 23 degrees C at sea level (average conditions)

4 minutes at 40 degrees C at three kilometers (km) altitude (extreme conditions)
9


#1 Phillips-head screwdriver

  .!
1. Loosen the four front thumb-screws.
2. Pull the assembly out of the switch as shown in Figure 6-4.

 (
-! ,
0!