Dell PowerVault 56F (16P Fibre Channel Switch) - Manual (Page 76)

4-20 Installation and Troubleshooting Guide
The help display changes depending on the login user level, license key, and switch
model, and will display only on licensed products using front panel commands. The
types of admin level commands available are:

General

Diagnostic

Routing

Licensed
— Zoning commands
The i command prints a currently running task summary. The fields are described in
Table 4-10.
( 3
 !!'
'   
%    
Name Task name
Entry Task entry point ID
TID Task ID
PRI Task priority
Status Ready — Task is not waiting for any resource other than the
microprocessor
Pend — Task is blocked due to the unavailability of some resource
Delay — Task is asleep for some duration
Suspend — Task is unavailable for execution (but not delayed or
pended)
Delay — +S Task is both delayed and suspended
Pend — +S Task is both pended and suspended
Pend — +T Task is pended with a timeout
Pend — +S+T Task is pended with a timeout and also suspended
Dead — Task no longer exists
PC Program counter
SP Stack pointer
ERRNO Last error number generated by this task
Delay For pending tasks, the amount of time a task has been waiting to
execute