Dell PowerVault 56F (16P Fibre Channel Switch) - Manual (Page 98)

4-42 Installation and Troubleshooting Guide


#
Table 4-25 shows the uRouteShow command, which displays the port's unicast rout-
ing information, which is the output port used to forward frames to the domain. Only
one output port is used to forward frames from one input port to a destination
domain.
The command uRouteShow now has three different syntax options:

'/'
#6B 85B

8 — displays the route for port to
domain

'/'
#6B 8 — displays the route for port to all the active domains
in the fabric

'/'
#6 — displays the route for all the ports on the switch to all the active
domains in the fabric
In addition, in all three formats uRouteShow shows for each route, the domain ID of
the next hop, and the port number on the next hop.

( 
- 
 !!'+4! 
switch:admin> uRouteShow
2  3413

14934%'9
 D) 
+,359

735
 7!!35
77--35
 7  35
 735

35
 !!35
7--35
   35
 35

! 35
  !!35
7 --35
    35
  35

 '
<<+