Sony PCG-717 - Manual (Page 142)

II
Notes on Use
This section describes safety guidelines and precautions to help protect
\’our computer from potential damage.
On Handling the LCD Screen
J Do not leav^e the LCD facing the sun as it can damage the LCD. Be
careful when using fhe computer near a window.
J Do not scratch the LCD or exert pressure on it. This could cause
malfunction.
□ Using the computer in low temperature conditions may produce a
residual image on the screen. This is not a malfunction. When the
computer returns to normal temperature, the screen returns to
normal.
□ A residual image may appear on the screen if the same image is
displayed for a lengthy period of time. The residual image disappears
in a while. You can use a screen saver to prevent residual images.
□ The screen becomes warm during operation. This is normal and does
not indicate a malfunction.
□ The LCD is manufactured using high-precision technology. You may,
however, see tiny black points and/or bright points (red, blue, or
green) that continuously appears on the LCD. This is a normal result
of the manufacturing process and does not indicate a malfunction.
On the Power Source
□ Your computer operates on 12()V-240V AC 50 / 60 Hz.
J Do not share the AC outlet with other power-consuming equipment,
such as a copying machine or shredder.
□ You can purchase a power strip with a surge protector. This device
prevents damage to your computer caused by sudden power surges
such as those that may occur during an electrical storm.
□ Do not place heavy objects on the power cord.
□ . To disconnect the cord, pull it out by the plug. Never pull the cord
itself.
□ Unplug your computer from the wall outlet if you will not be using
the computer for a long time.
133