Sony PCG-717 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Your Notebook Computer
Combinations/
Feature
Fn+ "d(F12)
System save to disk
mode
Fn+E
Eject CD-ROM
Fn+F
Change the display
size
Fn+D
Video standby
Fn-i-S
System standby
Functions
Provides for the lowest level of power
consumption. When you execute this command,
the state of the system and state of the
peripheral devices are written to the hard disk
and the system power is turned off. To return
the system to the original state, use the power
switch to turn on power.
Ejects the CD-ROM drive. This command is
active only when the CD-ROM drive is in the
drive bay; it is inactive when the driv'e is in the
docking station.
Zooms in or zooms out the display size.
Turns off the LCD in order to save power.
Puts the system in standby mode, a power
management state. When the system enters
standby mode, the hard disk and video enter a
low power state, and the CPU clock and the
processor are not active.
22