To remove the battery pack – Sony PCG-717 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Your Notebook Computer
^
See "Using a Second Battery Pack” on page 40 for information on installing and charging a
battery pack in the drive bay.
Keep the battery pack in the computer while it is directly connected to AC power. The
battery pack continues to charge while you are using the computer.
When the remaining battery charge drops to 7%, the computer automatically enters System
Save to Disk mode. This may result in data loss as the system changes modes.
You can extend battery life by changing the power management modes in the PowerPanel
utility. See "Using Power Saving Modes" on page 38.
The battery pack supplied with your computer is a lithium ion battery and can be recharged
at any time. Charging a partially discharged battery does not affect battery life.
The battery indicator light is on while you use the battery pack as a power source. When
battery life is nearly over, the battery indicator starts flashing.
To remove the battery pack
1
Open the cover of the battery bay.
2
Pull out the battery pack.
3
Close the cover of the battery bay.
1 2