To remove a pc card – Sony PCG-717 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using PC Card
> 1
2
Ronio\'o the PC card slot protector.
When you use a Type HI PC card, you need to remove both the top
and bottom PC card slot protectors.
3
Insert the PC card into the PC card slot, front label facing up. Gently
push the card into the slot until the card is fixed into the connector.
The release button comes out.
PC card
^ Do not force a card into the slot. It may damage the connector pins.
If you have difficulty inserting a card, check that you are inserting the card with the correct
orientation.
To remove a PC card
1
Pull the PC card release button up and press it.
2
Gently grasp the card and pull it out.
3
Insert the PC card slot protector back into the empty slot.
35