Using the weight saver, To attach the weight saver, To remove the weight saver – Sony PCG-717 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Using Your Notebook Computer
Using the Weight Saver
The weight saver protects the drive bav when it is empty.
To attach the Weight Saver
1
If another device is in the drive bay, remcrve the device. See "To
remove a floppy disk" on page 27, "To remove fhe CD-ROM drive"
on page 30, or "To remove the second battery pack" on page 41.
2
Slide the weight saver in the direction of the arrow until it clicks.
Weight saver (supplied)
To remove the Weight Saver
There is an Eject lever on the bottom of the weight saver. To remove the
weight saver, slide this lever in the direction of the arrow.
42
Advertising
This manual is related to the following products: