AVer MXR6008 User Manual
Page 111
105
Name
Function
(6) Archive
Select the date on the calendar and the time from 00 to 23 to where to start playing the
recorded video file.
– Also, user can open the recorded file from certain location by click OPEN FILE button
– Channel 01~ 16 and Channel 17 ~ 32: If channels are over 16, click it to switch to
different channel group of playback calendar.
– Mark Day Light Saving, the playback calendar will show the available playback
records during day light saving period.
i
The numbers from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 08 represent
the camera ID. The blue colored column indicates that there is a recorded video file on that period of
time. While the red colored column indicates on where to start playing the recorded video file.
(7) Preview
Switch to Preview/Advanced mode.
(8) Playback
Switch to Playback mode. This allows you to view the recorded video file.
(9) Status bar
Display the recorded date, time and play speed.
(10) Camera ID
Show the number of cameras that are being viewed. When you are in single screen
mode, click the camera ID number to switch and view other camera.
(11) Export
Export includes Snapshot, Print, and Output Video Clip function.
Snapshot: Capture and save the screen shot either in *.jpg or *.bmp format.
Print: Print the screen shot.
Output Video Clip: Save the segmented file in *.mpg, *.avi, or *.dvr format (see
also
(12) Segment
Keep a portion of the recorded video (see also
(13) Full screen
View in Playback-compact mode. To return, press the right button of the mouse or ESC
on the keyboard.
When you switch to full screen in multiple-screen mode, Left click to toggle to only
display one of the video in the multiple-screen mode or all.
(14) Event log
Show the record of activities that take place in the system. To filter the records, select
and click the option button to only display Event, System, Operation, Network or POS.
(15) Visual Search
Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second. (See
also
i
The Visual and Intelligent search only available when the remote site is recording and playback from
remote local hard disk.
(16) Find Next
Search for the next event or changes in the motion detector frame. You can use this
when you are using Intelligent Search or Event Search function.
(17) Intelligent Search
Search the changes in the motion detector frame (See also
(18) Audio
Enable/disable audio play
(19) De-interlace
To enhance the video quality. Set the de-interlace mode to #1, if you are capturing
motionless picture and #2, if it captures lots of movement.