AVer MXR6008 User Manual
Page 66
60
- Send E-mail
Send an electronic text message. Beside the Send Email check box, click Detail.
In the E-mail Setting dialog box, click OK to exit and save the setting and Cancel to exit
without saving the setting.
Mail Server
Enter the SMTP Server and port. If your e-mail system requires user identification,
enable Authentication check box and enter ID and Password.
Fill the mailing information.
From: Enter the sender e-mail address.
To and CC: Enter the recipient email address and separate it with comma or a
semicolon (;).
Subject: Enter the message title.
Message: Type the message.
- Start Recording
Record the video from the selected camera.
1.
Beside the Start Recording check box, click Detail.
2.
In the Alarm Recording Setting dialog box, select the camera to enable/disable video
recording. Enable All to select all cameras.
3.
In the Frame Rate selection, select As Setting to record the number of frames based on
the Recording Setting.
4.
In the Start Record prior text box, mark and set the number in second for the program
to begin recording after the alarm has been trigger. The time range is 1~10 seconds.
5.
In the Stop Record after text box, mark and set the number in second for the program
to continue recording after the alarm has ended. The time range is 1~999 seconds. If
user doesn
’t mark and set the time, the alarm recording will continue recording until
alarm is reset.
6.
Click OK to accept the new settings and Cancel to exit without saving.