Make a connection of the ip camera, 2 make a connection of the ip camera – AVer MXR6008 User Manual
Page 19
13
2.3.2 Make a Connection of the IP Camera
When the DVR server has been connected, user can connect the IP camera to monitor.
Following the below steps to make a connection of the IP camera.
1.
Run the MXR Client Software on your PC that is located
on the same network as DVR server.
2.
In Authorization window, enter the ID and Password
(default is superuser/111111) for authentication.
3.
Click
(Setup) from surveillance application
interface. Enter the ID and Password (default is
superuser/111111). In Mode Select dialog, select Server
Setup and click OK.
4.
The Setup bar will show up.
5.
Select the Camera. The Camera setting window will show up.
6.
Select camera icon and enable the camera
7.
Select IP Camera in Input section
8.
Mark Display to show the video of the camera on the screen.
9.
Mark Audio to enable the audio of the camera to be recorded.
10. Enter the Name and Description of the camera.