AVer MXR6008 - Manual (Page 48)

42
3. Click button to locate the new firmware.
4. Click Update to start upgrading.
5. When complete message shows up, it means the update process is completed.
6. The DVR system will re-boot automatically. After DVR system reboot, user can continue
operate the DVR system.
 IPCam Module Firmware Update: Update firmware of IP camera.
1. Save the firmware under the local hard disk direction.
2. Click Update button, the ISP Setting window will show up.
3. Click button to locate the new firmware.
4. Click Update to start upgrading.
5. When complete message shows up, it means the update process is completed.