AVer MXR6008 - Manual (Page 67)

61
- PTZ preset point
Position the PTZ camera based on the preset point setting. Next to the PTZ preset point
check box, click Detail. In the Trigger PTZ Preset Setting dialog box, select the PTZ
camera number then select the Enable check box. Select the position of the PTZ camera
when the alarm is activated and ended. For the PTZ camera end point, user can also select
on preset position or Auto Pan between preset position groups.
- Send to CMS (Central Management System)
Enable/disable the selected camera to send video to CMS when the alarm is activated.
Beside the Send to CMS check box, click Detail. In the CMS Setting, select the camera to
enable/disable sending the video to CMS. Enable All to select all cameras. Then, click OK
to accept the new settings and Cancel to exit without saving.