AVer MXR6008 User Manual
Page 50
![background image](/manuals/634487/50/background.png)
44
(5) IP Camera Information
To setup IP camera and display current IP camera information.
Use IP Camera Motion: Mark to enable the motion detected function if the IP camera has
supported. Once this function has enabled, the motion detection will based on the IP camera
has supported.
IP Setting: Click IP setting to add the IP camera.
1. Click the radio button of Protocol to start setup IP camera.
2. Select the Protocol, Model, Video Format, and Channel of the IP camera.
3. Enter IP address and connecting port in IP Camera Site column.
4. Also, user can enter URL of IP camera instead of IP address.
5. If the IP camera has authority request, please enable Authentication and enter ID and
Password.
6. Click OK to connect with the IP camera.
Detail: To adjust IP camera parameters, click Detail. Click Default will back to the factory
default value.