AVer MXR6008 - Manual (Page 130)

124
To Setup Camera from the Remote DVR
User can add the camera from another DVR through the network. Click Update to accept the
new settings, click Cancel to exit without saving, and click Default to revert back to original
factory setting.
(1)
(2)
(3)
(4)
(5)
(1) Camera Icons
Select the camera number you want to view. To enable/disable all cameras, click ALL check box.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we
suggest disabling it so that the system won’t detect it as video loss error.
(3) Input
Select the camera type as Remote DVR.
(4) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you
can still record the video and preview it in playback mode.
- Enable Audio
Enable/disable audio of the camera.
- Name
Enter the name of the camera that will be seen on surveillance screen.
- Description
Add a short comment
(4) Remote Camera Setting
- IP
Enter the IP address of the camera
- Port
The port for connection
- User ID