AVer MXR6008 - Manual (Page 143)

137
- PTZ preset point
Position the PTZ camera based on the preset point
setting. Beside the PTZ preset point check box,
click Detail. In the Trigger PTZ Preset Setting
dialog box, select the PTZ camera number then
select the Enable check box. Select the position of
the PTZ camera when the alarm is activated and
ended. For the PTZ camera end point, user can
also select on preset position or Auto Pan between
preset position groups.
- Send to CMS (Central Management System)
Enable/disable the selected camera to send video
to CMS when the alarm is activated.
Beside the Send to CMS check box, click Detail. In
the CMS Setting, select the camera to
enable/disable sending the video to CMS. Enable
All to select all cameras. Then, click OK to accept
the new settings and Cancel to exit without saving.