AVer MXR6008 - Manual (Page 131)

125
Enter the user id that for connecting authority
- Password
Enter the password that is for connecting authority
- Channel
Select the channel of connected camera
- Connect
Click to connect the camera when all configurations are set.
9.2.2.3 Recording Setting
Click Update to accept the new settings, click Cancel to exit without saving, and click Default to
revert back to original factory setting.
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras,
enable the ALL check box. To select more than one camera, Right click on the camera icon. To
select one camera only, Left click on the camera icon. The camera icon turns purple when it is
selected.
(2) Recording Mode
The horizontal blocks from 00 to 23 represent the time in 24-hour clock and the vertical blocks
represent the day in the week block (Sunday to Saturday). To record in full 24 hours and 7 days a
week, select the Always Recording mode. If you want to only record at a particular time or day,
click Schedule button and select the Recording Mode , and then click on the time or day blocks.
When the system starts recording a red triangle mark would appear at the upper left corner of the
screen.
The recording modes are listed below:
- Always Recording
Record the video from the selected camera and save it to the designated storage device
- Motion Recording