Relay setting, 10 relay setting – AVer MXR6008 User Manual
Page 61
Advertising
55
3.10 Relay Setting
The I/O device must be installed to use this function.
1. Click the drop-down list and select the relay ID number.
2. Enter relay name in Name column.
3. The system automatically detects the card and input number. In the Content section, enter
Description of relay.
4. In the test section, click Test to trigger relay. Red is high and Green is low.
5. Click Update to accept the setting and Exit to exit without saving the setting.
Advertising
This manual is related to the following products: