AVer MXR6008 - Manual (Page 142)

136
- Send E-mail
Send an electronic text message.
Beside the Send Email check box,
click Detail.
In the E-mail Setting dialog box,
click OK to exit and save the
setting and Cancel to exit without
saving the setting.
 Mail Server
Enter the SMTP Server and
port. If your e-mail system
requires user identification,
enable Authentication check
box and enter ID and
Password.
 Mail
Fill the mailing information.
From: Enter the sender e-mail
address.
To and CC: Enter the recipient email address and separate it with comma or a
semicolon (;).
Subject: Enter the message title.
Message: Type the message.
- Start Recording
Record the video from the selected camera.
1. Beside the Start Recording check box, click
Detail.
2. In the Alarm Recording Setting dialog box,
select the camera to enable/disable video
recording. Enable All to select all cameras.
3. In the Frame Rate selection, select As Setting
to record the number of frames based on the
Recording Setting.
4. In the Start Record prior text box, mark and
set the number in second for the program to
begin recording after the alarm has been trigger.
The time range is 1~10 seconds.
5. In the Stop Record after text box, mark and set the number in second for the program
to continue recording after the alarm has ended. The time range is 1~999 seconds. If
user doesn
’t mark and set the time, the alarm recording will continue recording until
alarm is reset.
6. Click OK to accept the new settings and Cancel to exit without saving.