Sensor setting – AVer MXR6008 User Manual
Page 95
Advertising
![background image](/manuals/634487/95/background.png)
89
5. To end Schedule Setting, click OK to exit and accept the setting and Cancel to exit without
saving the setting.
7.1.1.6
Sensor Setting
The I/O device must be installed to use this function.
6. Click the drop-down list and select the sensor ID number.
7. Enter sensor name in Name column.
8. The system automatically detects the card and input number. In the Content section, enter
Description of sensor.
9. In the test section, click Test to check the sensor status. Red is high and Green is low.
10.
Click Update to accept the setting and Exit to exit without saving the setting.
Advertising
This manual is related to the following products: