AVer MXR6008 - Manual (Page 126)

120
6. When connection is lost, click Reconnect to connect again.
7. To modify or delete the added DVR server, select the DVR server from listing and click Modify to
change the setting and click Delete to remove the DVR server.
8. User also can import the setting by clicking Import button. To save the setting to local hard disk, click
Export button.
9.2.2 To Setup Remote System Setting
The setting here applies to Remote DVR only.
9.2.2.1 System Setting
In the System Setting dialog box, click Update to accept the new settings, click Cancel to exit
without saving, and click Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(1) Storage Path
Display the directory on where to save the data. You may also add additional storage path for
extremely high storage capacity. To insert another storage path, click Add. To remove the
selected path, click Delete.
If you want the system to automatically erase the data after a certain days, enable the Delete
recorded data after check box and enter the numbers of days in Days text box.
If you want the system to automatically erase the Event and alarm log after a certain days,
enable the Delete event and alarm log after check box and enter the numbers of days in Days
text box.
Enable Overwirte Enable, when there is not enough free space to record one hour data, the
system automatically replaces the oldest data. In case you have more than one storage path, the
system automatically saves the data to the next storage path.
(2) Language
Customize the system to display the tool tips and dialogs based on the selected language. By
default the language is in English.