SINGER 6680 - Manual (Page 60)

58
1
2
3
4
MANUAL BUTTONHOLE
* Use the automatic buttonhole foot up to 1
3/4 “(45 mm) in length, but don’t lower the
buttonhole lever or a beep will sound.
* U s e t h e s a t i n f o o t t o c r e a t e l a r g e r
buttonholes.
* Carefully mark the buttonhole length on
your garment. Place the fabric with the
buttonhole marked under the buttonhole
foot. Slide the foot forward so that the
needle pierces the fabric at the beginning
of the buttonhole.
PROCEDURE
1. Start the machine to form first bartack
and left side of buttonhole.
2. Sew second bartack and stitch backward
u n t i l n e e d l e r e a c h e s b e g i n n i n g o f
buttonhole.
3. Stitch forward to the end of buttonhole
mark to complete buttonhole.
4. Push the reverse stitch switch to tie off
the stitches.
NOTE: If stitch length is manually set
at 0.8 (mm) for step 1, set the stitch
length at 0.8 (mm) for step 3 as well.