SINGER 6680 - Manual (Page 68)

66
PRENSATELAS DE RODILLO
Al coser piel, cuero, plástico y velludo, ajustar
el pie prensatelas rodillo para corriente suave
de tejido. Sin embargo, especialmente al coser
piel más suave y cuero, pie prensatelas zigzag
normal da mejor resulta.
6.6699/6680 ACCESORIOS INCLUIDOS
ROLLER FOOT
When sewing leather, suede, plastic and
YHOYHW ¿W WKH UROOHU IRRW WR DLG WKH VPRRWK
flow of fabric. However, especially when
sewing softer leather and suede, better
results may be achieved by using the
normal zigzag foot.
6. 6699/6680 ONLY ACCESSORIES
6. ACCESSOIRES EXCLUSIF AU MODÈLE 6699/6680
INVISIBLE ZIPPER FOOT
T h e I n v i s i b l e Z i p p e r F o o t p r o v i d e s a
concealed closing on a variety of garments
and accessories. It is commonly seen on
the side or back of skirts and dresses.
Machine Preparation
‡$WWDFK,QYLVLEOH=LSSHU)RRW
‡6HWPDFKLQHWR6WUDLJKW6WLWFK
‡6HWVWLWFKOHQJWKWRPHGLXP
‡0DNHVXUHQHHGOHSRVLWLRQLVOLQHGXS
1. Open zipper by pulling down on the slider and
pull tab located at the top of the zipper.
2. Working on the right side of the fabric, baste the
zipper face down along the seam edge of the
right-hand side of garment. The teeth or coils of
the zipper lay toward the interior of the seam.
3. Line up the teeth (coils) of the zipper with the
right groove of the zipper foot. The needle will
penetrate the tape of the zipper alongside the
teeth (or coils).
4. Sew from top to bottom of the seam as far as
possible, backstitching at the beginning and
end of the seam.
5. To sew the other side of the zipper, flip the
zipper over twice to the left and then line up the
tape of the opposite side of the zipper along the
seam edge of the left-hand side of the project.
6. Line up the teeth of the zipper with the left
groove of the zipper foot.
7. Sew from top to bottom of the seam as far as
possible, backstitching at the beginning and
end of the seam.
8. Close the zipper.
9. Remove the Invisible Zipper Foot and replace
it with the regular Zipper Foot.
10. Sew a 5/8'' seam all the way down to the
bottom of the seam, starting as close to the
zipper as possible.
PIED A GALETS
Utilisez le pied à galets pour les cuirs, les daims, le
plastique et velours afin de faciliter l’entraînement
du matériau.Cependant, lorsque vous piquez sur
du cuir fin ou du daim, vous obtiendrez de meilleurs
résultats avec le pied pour point zigzag.