Special accessories, Satin stitch foot, Twin needle – SINGER SES1000 FUTURA User Manual

Page 104: Threading the twin needle

Advertising
background image

0

SATIN STITCH FOOT

The Satin stitch foot is grooved on the bottom to permit dense
stitching to pass under it easily. It is most useful for sewing
satin stitches. It can also be used as an alternative to the
General Purpose Foot when sewing stretch stitches.

Closely spaced zig-zag stitches are called satin stitches. This
is an attractive stitch used primarily for appliqueing and bar

tacking. Slightly loosen top thread tension for satin stitching.

Use a backing of stabilizer or interfacing to avoid puckering.

TWIN NEEDLE

A twin-needle produces two rows of parallel stitches for pin

tucks, double top stitching and decorative sewing.
When using twin-needles, the stitch width should never be
set above twin needle mark,
regardless of the stitch you

have selected. Doing so will result in broken needles and
possible damage to your machine.
Use of a Singer Brand twin needle (Style 2025) is strongly
recommended.

The twin needle is an optional purchase.

THREADING THE TWIN NEEDLE

1. Place a spool on each spool pin. Thread the two threads

as one. Draw one thread through each needle from front to

back.

2. Pick up bobbin thread as for single needle sewing. Pull the

three threads together under the presser foot to the back of
the machine, leaving about 6” (15 cm) clear.

NOTE: Needle threader cannot be used to thread the
twin needle.

SPECIAL ACCESSORIES

Advertising
This manual is related to the following products: