SINGER SES1000 FUTURA User Manual

Page 26

Advertising
background image



Stitch length and width/needle position controls

*Auto/Default settings

Your sewing machine will produce most of your stitching
requirements at an Auto/Default Stitch Length and Width. When
a pattern is selected, it will automatically sew at default settings of
stitch length, width and needle position for straight stitch.

Auto (preprogrammed) default settings are easily determined
by moving the Stitch Length and Width / Needle Position
Control Knob. The LED Indicator next to the Control will light

in orange without blinking and a beep will sound indicating you
are at the Auto / Default Position.

*Manual settings
Once you have determined the Auto / Default position you can
manually change the length, width or straight stitch needle
postition according to your preference. Starting at the Auto

position, slide the control knob left or right to locate each of
the potential adjustments. At each manual adjustment point,

the LED will blink 3 times in green and a beep will sound.

The LED will light in red beyond the potential adjustment range.

NOTES: 1. Some patterns offer more opportunities for

manual adjustments than others.

2. A n a l t e r n a t e m e t h o d o f d e t e r m i n i n g

a v a i l a b l e a d j u s t m e n t s i s t o m o v e t h e
control knobs while sewing slowly.

Advertising
This manual is related to the following products: