SINGER SES1000 FUTURA User Manual

Page 68

Advertising
background image



If embroidering onto material which is smaller than
the hoop size, or when embroidering close to the
edge of material, attach the stabilizer as illustrated.

WHEN EMBROIDERING ALONG THE EDGE OF

MATERIAL SUCH AS A HANDKERCHIEF

WHEN EMBROIDERING A NARROW PIECE OF
FABRIC SUCH AS RIBBON TAPE

 Use two layers of interfacing if required by the material.
 Always use a layer of stabilizer which is bigger than the

hoop being used. (The stabilizer will not work properly
unless it is clamped by the hoop together with the material
being embroidered.).

 Stabilizer can usually be obtained from a fabric store.

Stabilizer is available in several different types, from thin

to thick. Purchase whichever type suits your embroidering
needs. It is generally recommended that the weight of the
stabilizer be similar to that of the fabric.

Embroidery surface at material edge
Surface de broderie sur le bord du tissu

Superficie de bordado en el borde del material

Stabilizer
(Adhesive surface facing)

Entoilage
(face à la surface adhésive)

Estabilizador

(cara de la superficie adhesiva)

Stabilizer
Entoilage
Estabilizador

Hoop inner frame
Cadre intérieur du cerceau
Interior del marco del aro

Ribbon tape
Ruban
Cinta

Stabilizer
Entoilage
Estabilizador

Hoop inner frame
Cadre intérieur du cerceau
Interior del marco del aro

Advertising
This manual is related to the following products: