Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) - Manual (Page 13)

13
Orient. +
Height T.
Ori\ Target Point
MC
Configuration Call the configuration in the first application dialog.
SHIFT
F2 F2 F2 F2 F2
CONF
If the computed (a posteriori) standard deviations are within twice
the values entered for the a priori standard deviations, the
computed station coordinates and orientation will be accepted.
Ori\ Configuration
Hz Ori Acc : 0.0100 g
MC
Hz Ori Acc A priori standard deviation of the orientation.
Ht Acc TP A priori standard deviation of the elevation of the
target points.
Posn AccTP A priori standard deviation of the position (East
and North coordinates) of the target points.
User Disp Use the display mask defined by the user.
Two Faces Single or two face measurement.
Log File Creation of a logfile.
Log FlName User definable name for the logfile.
Data Job Selection of the job containing the fix point
coordinates.
Meas. Job Selection of the job for recording measurements.