Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) - Manual (Page 67)

67
Reference
Line
Setting Out elements
F1 F1 F1 F1 F1
REFL
Enter Point Id to be set out.
To measure a distance and trigger the calculation of the
setting out elements:
∆
Offset,
∆
Line and
∆
Ht.
F2 F2 F2 F2 F2
DIST
F1 F1 F1 F1 F1
ALL
∆∆∆∆∆
Offset Perpendicular offset
∆
Offset+ To the right of the
reference line.
∆∆∆∆∆
Line Line offset from the
1st Ref. Point.
∆
Line+ In the line direction.
REFLN\ Ref Line Results
Point Id : 3
∆∆∆∆∆ Offset : 1.230 m
∆∆∆∆∆ Line : 2.463 m
∆∆∆∆∆ Ht : 0.235 m
Elevation : 100.500 m
ALL DIST REC DONE
MC
1
100pr20
∆
Offset +
Reference Line
Measured
Point
1st Ref. Point
∆ Line +
∆
Ht: Height Offset in relation to the reference
Elevation (Elevation of the 1 st Base Point).
Elevation: Elevation of the measured point.
To display
∆
Line from the second point.
To measure and record setting out point. Point Id is
incremented.
To return to Define Reference Line dialog.
To quit the Reference Line program.
SHIFT
F4 F4 F4 F4 F4
DONE
F4 F4 F4 F4 F4
∆∆∆∆∆ L P2
F6 F6 F6 F6 F6
QUIT
SHIFT