Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) - Manual (Page 72)

72 Advanced: Height Offset
Interpolated reference
elevation
For the configuration Ref.Elev. = Baseline, the reference elevation
for the calculation of
∆
Ht values is the elevation of the baseline at
the reflector position.
You can modify the reference elevation by specifiying a height offset
(Ht.Offset) in the dialog for the definition of the reference line.
Results dialog with setting out elements:
Configuration:
Ref. Elev. = Reference Line
Ht. Offset = ON
Setting out elements:
∆
Ht Along vertical
∆
Perp.Dist Perpendicular to
the Ref. line
∆
Spat.Dist Line offset along
the Ref. line
REFLN\ Ref Line Results
Point Id : 3
∆∆∆∆∆ Offset : 1.230 m
∆∆∆∆∆ Line : 2.463 m
∆∆∆∆∆ Ht : 0.235 m
∆∆∆∆∆ Perp.Dist : 100.500 m
∆∆∆∆∆ Spat.Dist :
ALL DIST REC CONT
MC
1
100pr23 1st Base Point
2nd Base Point
Elevation
Ref. Elevation
∆ Ht+
Ht Offset+
∆
Perp.Ht
∆ Spat.Dist+