Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) User Manual
Page 34
![background image](/manuals/651964/34/background.png)
34
Advanced Feature:
Configuration of the
stakeout method
Call the dialog for the configuration of the stakeout method from
any stakeout dialog.
STAKE\ Azimuth & Distance
MC
STAKE\
Method
Coarse Mod :
Azimuth & Dist
MC
SHIFT
F2
F2
F2
F2
F2
METHD
Coarse Mode
Selection of the coarse stakeout mode (see
chapter
"Advanced Feature: Coarse mode").
Stake Mode
Selection of the main stakeout mode. (see
chapter
"Advanced Feature:: Stakeout mode").
Auto Pos.
Selection of the mode for automatic positioning
to the point to be staked (for motorized
instruments only).
• OFF
No automatic positioning.
• 2D or 3D
2-dimensional or 3-dimensional positioning.
Ht Offset
Height offset addet to the design elevations of
the points to be staked. CUT and FILL values
refer to the elevations modified by the offset.
Graphics
Select the graphic mode to be displayed in the
main stakeout dialog (see chapter "Advanced
Feature: Graphic mode").