Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) - Manual (Page 17)

17
Resection
MAIN MENU: PROGRAMS
MC
Check the geometry of the target points in relation to the station
point. Avoid very small or very large angles at the station.
Start Resection from the program menu.
Start resection
PROG
Enter the station Id and the instrument height.
Enter Point Id and reflector height at the first target point.
F1 F1 F1 F1 F1
CONT
RESEC\ Station Data
Point Id : ST1
Inst.Ht. : 1.65 m
MC
RESEC\ Target Point
Point Id : 1001
Refl.Ht. : 1.60 m
MC