Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) - Manual (Page 63)

63
Reference
Line
Basic procedure
Before starting Reference Line:
The station must be set up and oriented.
A Baseline or -arc is defined in the first step. There are three
methods to define a base: Line, Radius Arc, and 3-Point Arc.
Start any of the methods from the Reference Line Menu.
Line of sight to the baseline points is not needed. They can be
imported from a data file.
Points with known offset values from the defined line or arc can
easily be set out with the function Line & Offset.