Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) - Manual (Page 66)

66
REFLN\ Ref Line Menu
MC
Define Reference Line
Start Baseline from the Ref Line Menu
Enter the first point of the baseline.
To search and import point from data job.
Repeat sequence for second point of baseline.
And define the reference line parameters:
F1 F1 F1 F1 F1
SEARC
direction of the
baseline
Offset + to the right of the
baseline
Offset - to the left of the
baseline
For Arc the radial offset is
applied to each point.
REFLN\ Define Baseline
1st Point of Baseline
MC
REFLN\ Define Reference Line
1st BasePt : 1
2nd BasePt : 2
LineLength : 21.251 m
Offset : 0.000 m
REFL L&O NEW-L
MC
To define new baseline.
Offset = 0 Reference line = Baseline
Offset
≠
0 Reference line parallel to Baseline
1
100pr19 1st Base Pt.
2nd Base Pt.
Baseline
Reference Line
Offset + Offset -
To set out points with known offsets.