Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) - Manual (Page 69)

69
Reference
Line
To measure and record point. Continues to the first L&O
dialog to enter offsets for next point.
Returns to first L&O dialog to enter offsets without recording
data.
F1 F1 F1 F1 F1
ALL
F4 F4 F4 F4 F4
CONT
Advanced Feature:
Configuration of the L&O
method
Call up the dialog for the configuration of the L&O
method from the set out dialog.
F6 F6 F6 F6 F6
METHD
SHIFT
Stake Mode Selection of the stakeout mode:
Ortho-
Reference Stakeout elements are calculated in relation to the
reference line/arc.
Ortho-Station Stakeout elements are calculated in relation to the
line defined by station and reflector.
Polar Stakeout elements are calculated in relation to the
station and the measured point.
Auto Pos. Mode for automatic positioning to the point:
OFF No automatic positioning
2D or 3D 2-dimensional or 3-dimensional positioning
Symbols Symbols can be used to guide the rod person to
the point to be staked.
Orthogonal ON: positive in direction of reference.
Polar - From Station (
↑↓
): Guides rod from station
- To Station (
↓↑
): Guides from the rod in relation to
the instrument station (if working in RCS mode)