Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) - Manual (Page 74)

74
Edit Elev.
= ON Edit or add elevation in the Ref Line and L&O
Results dialogs. New elevation is stored.
= OFF Elevation cannot be changed or added in Results.
Rec Diff To record setting out elements in a measurement
block.
= NONE Record measurement block according to REC-
Mask.
= O, O/L, O/L/H
or
O/S, O/S/P
Record additional values:
O =
∆
Offset, L =
∆
Line/
∆
Arc, H =
∆
Height
S =
∆
Spat.Dist, P =
∆
Perp.Dist (available only if
Ref. Elev. = Baseline)
User Disp To display the user-defined display mask in
measurement mode.
Logfile To create a logfile.
Log FlName User definable name for the logfile.
Meas. Job Selection of the job for recording measurements.
Data Job Selection of the job containing the fix point
coordinates.
Other parameters
To exit the configuration dialog.
F1 F1 F1 F1 F1
CONT
1
100pr25
1st Ref. Point
2nd Ref.
Point
∆ Ht
Ref. Elev = Reference Line
Elevation