Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 1) - Manual (Page 47)

47
Remote
Height
MAIN MENU: PROGRAMS
MC
In practice, it is not possible to maintain an exact vertical
alignement of base point and remote point. Depending on the
needed accuracy, you can set the maximal displacement of the
remote point to be tolerated (see chapter
"Configuration").
Measure Base Point
Start Remote Height from the program menu.
PROG
Enter point Id and reflector height at the base point.
To measure and record the base point. (See chapter "Measurement
options").
Continues to the next dialog for remote point measurements.
F2 F2 F2 F2 F2
ALL
REMHT\ Meas. Base Pt.
Point Id : 102
Hz : 123°32'23''
V : 10°34'20''
Refl. Ht. : 1.60 m
Slope Dist : ----- m
Elev. Diff : ----- m
ALL DIST REC REMOT
MC